WAC Flexrail 1 is WAC Lighting's bendable line voltage
single circuit track system
Flexrail 1
WAC Flexrail 1 is WAC Lighting's bendable line voltage
single circuit track system. The robust construction
and insulated circuitry ensures reliable and safe performance.
This new rail system is available is Platinum and Bronze
finishes and a variety of line/low voltage fixtures
and pendants. The Flexrail 1 system is compatible with
all WAC Lighting Quick Connect elements, providing a
selection of over 200 low voltage track heads and pendants
that can be used with the system.
Perfect for residential or commercial lighting requirements,
WAC Flexrail 1 is suitable for even the most challenging
ceilings. The WAC Flexrail 1 system offers an extensive
selection of suspension and power options to accommodate
different ceiling types. Standard suspension Lengths
range from 6" to 48" that can be joined
for maximum custom capabilities.
Thoughtfully engineered, the WAC Flexrail 1 is favored
by electricians for its ease of installation and reliability.
Although hand-bendable in the field for smaller installations,
a bending tool is also available to expedite installations
and make exacting curves.
The Flexrail 1 system is compatible with all WAC Lighting
Quick Connect elements, providing a selection of over
200 low voltage track heads and pendants that can be
used with the system.
HM1-PCC12-BZ $78.00 ($66.00 with minimum
order)
HM1-PCC12-PT $78.00 ($66.00 with minimum
order)
HM1-PCC24-BZ $90.00 ($76.00 with minimum
order)
HM1-PCC24-PT $90.00 ($76.00 with minimum
order)
HM1-PCC36-BZ $102.00 ($86.00 with minimum
order)
HM1-PCC36-PT $102.00 ($86.00 with minimum
order)
HM1-PCC48-BZ $114.00 ($96.00 with minimum
order)
HM1-PCC48-PT $114.00 ($96.00 with minimum
order)
HM1-PCC96-BZ $126.00 ($107.00 with minimum
order)
HM1-PCC96-PT $126.00 ($107.00 with minimum
order)
Used for powering sloped ceilings or custom
suspension Lengths.
Model No.
Overall Height
HM1-PCC12
12"
HM1-PCC24
24"
HM1-PCC36
36"
HM1-PCC48
48"
HM1-PCC96
96"
WAC
Flexrail 1 Standard Standoff Suspension
HM1-X6-BZ $50.00 ($42.00 with minimum
order)
HM1-X6-PT $50.00 ($42.00 with minimum order)
HM1-X12-BZ $52.00 ($44.00 with minimum
order)
HM1-X12-PT $52.00 ($44.00 with minimum
order)
HM1-X24-BZ $54.00 ($45.00 with minimum
order)
HM1-X24-PT $54.00 ($45.00 with minimum
order)
HM1-X36-BZ $56.00 ($47.00 with minimum
order)
HM1-X36-PT $56.00 ($47.00 with minimum
order)
HM1-X48-BZ $58.00 ($49.00 with minimum
order)
HM1-X48-PT $58.00 ($49.00 with minimum
order)
Supports rail for flat ceilings and surfaces.
Model No.
Overall Height
HM1-X6
6"
HM1-X12
12"
HM1-X24
24"
HM1-X36
36"
HM1-X48
48"
WAC
Flexrail 1 Sloped Ceiling Suspension
HM1-XS6-BZ $50.00 ($42.00 with minimum
order)
HM1-XS6-PT $50.00 ($42.00 with minimum
order)
HM1-XS12-BZ $52.00 ($44.00 with minimum
order)
HM1-XS12-PT $52.00 ($44.00 with minimum
order)
HM1-XS24-BZ $54.00 ($45.00 with minimum
order)
HM1-XS24-PT $54.00 ($45.00 with minimum
order)
HM1-XS36-BZ $56.00 ($47.00 with minimum
order)
HM1-XS36-PT $56.00 ($47.00 with minimum
order)
HM1-XS48-BZ $58.00 ($49.00 with minimum
order)
HM1-XS48-PT $58.00 ($49.00 with minimum
order)
Supports rail for sloped ceiling. Accommodates
angles up to 45°.
Model No.
Overall Height
HM1-XS6
7 3/4"
HM1-XS12
13 3/4"
HM1-XS24
25 3/4"
HM1-XS36
37 3/4"
HM1-XS48
49 3/4"
WAC
Flexrail 1 Stem Power Feed Connector
HM1-PCT6-BZ $94.00 ($79.00 with minimum
order)
HM1-PCT6-PT $94.00 ($79.00 with minimum
order)
HM1-PCT12-BZ $96.00 ($81.00 with minimum
order)
HM1-PCT12-PT $96.00 ($81.00 with minimum
order)
HM1-PCT24-BZ $98.00 ($83.00 with minimum
order)
HM1-PCT24-PT $98.00 ($83.00 with minimum
order)
HM1-PCT36-BZ $100.00 ($85.00 with minimum
order)
HM1-PCT36-PT $100.00 ($85.00 with minimum
order)
HM1-PCT48-BZ $102.00 ($86.00 with minimum
order)
HM1-PCT48-PT $102.00 ($86.00 with minimum
order)
Serves as both a support and power feed.
May be placed anywhere along the Length
of rail.
Model No.
Overall Height
HM1-PCT6
6"
HM1-PCT12
12"
HM1-PCT24
24"
HM1-PCT36
36"
HM1-PCT48
48"
WAC
HM-DCB-PT Flexrail 1 Suspended Ceiling Brace
HM-DCB-PT $20.00 ($17.00 with minimum
order)
Use in conjunction with standoffs and/or
cable suspension supports. When rail mounting
point is in the middle of a suspended ceiling
tile.
Finish PT-Platinum
WAC
Flexrail 1 T-Bar Ceiling Standoff Suspension
HM1-TB6-BZ $42.00 ($35.00 with minimum
order)
HM1-TB6-PT $42.00 ($35.00 with minimum
order)
HM1-TB12-BZ $44.00 ($37.00 with minimum
order)
HM1-TB12-PT $44.00 ($37.00 with minimum
order)
HM1-TB24-BZ $46.00 ($39.00 with minimum
order)
HM1-TB24-PT $46.00 ($39.00 with minimum
order)
HM1-TB36-BZ $48.00 ($40.00 with minimum
order)
HM1-TB36-PT $48.00 ($40.00 with minimum
order)
HM1-TB48-BZ $50.00 ($42.00 with minimum
order)
HM1-TB48-PT $50.00 ($42.00 with minimum
order)
Conceals a T-Bar clip under the canopy
for standard 1" T-Bar ceilings.
Model No.
Overall Height
HM1-TB6
6"
HM1-TB12
12"
HM1-TB24
24"
HM1-TB36
36"
HM1-TB48
48"
WAC
Flexrail 1 Variable Angle Connector
HM1-VA6-BZ $62.00 ($53.00 with minimum
order)
HM1-VA6-PT $62.00 ($53.00 with minimum
order)
HM1-VA12-BZ $64.00 ($54.00 with minimum
order)
HM1-VA12-PT $64.00 ($54.00 with minimum
order)
HM1-VA24-BZ $66.00 ($56.00 with minimum
order)
HM1-VA24-PT $66.00 ($56.00 with minimum
order)
HM1-VA36-BZ $68.00 ($58.00 with minimum
order)
HM1-VA36-PT $68.00 ($58.00 with minimum
order)
HM1-VA48-BZ $70.00 ($59.00 with minimum
order)
HM1-VA48-PT $70.00 ($59.00 with minimum
order)
Connects two sections of the track with
electrical continuity. Track can be connected
at any angle up to 270°.
Model No.
Overall Height
HM1-VA6
6"
HM1-VA12
12"
HM1-VA24
24"
HM1-VA36
36"
HM1-VA48
48"
Finish BZ-Bronze, PT-Platinum
Canopy 3"
WAC Flexrail 1 Low Voltage
Fixtures
WAC
HM1-816 Flexrail 1 Low Voltage Fixtures
HM1-816-BZ $86.00 ($73.00 with minimum
order)
HM1-816-PT $86.00 ($73.00 with minimum
order)
HM1-816L-BZ $92.00 ($78.00 with minimum
order)
HM1-816L-PT $92.00 ($78.00 with minimum
order)
Aimming wand gives this fixture a light,
balanced look.
Use MR16G covered lamps, or use the
LENS-16-CLIP with open MR16 lamps.
The LENS-16-CLIP includes a clear glass
lens, which may be substituted with an
accessory lens and honeycomb louver.
Integral electronic transformer.
HM1-816 50w
HM1-816L 75w
WAC
HM1-826 Flexrail 1 Low Voltage Fixtures
HM1-826-BZ $90.00 ($76.00 with minimum
order)
HM1-826-PT $90.00 ($76.00 with minimum
order)
HM1-826L-BZ $96.00 ($82.00 with minimum
order)
HM1-826L-PT $96.00 ($82.00 with minimum
order)
826 features a die cast aluminum body
with screw on lens cap.
Loop back design provides for easy aimming
and is a decorative element.
Integral electronic transformer.
HM1-826 50w
HM1-826L 75w
WAC
HM1-846 Flexrail 1 Low Voltage Fixtures
HM1-846-BZ $98.00 ($83.00 with minimum
order)
HM1-846-PT $98.00 ($83.00 with minimum
order)
HM1-846L-BZ $104.00 ($88.00 with minimum
order)
HM1-846L-PT $104.00 ($88.00 with minimum
order)
846 features a die cast aluminum body
with screw on lens cap.
Side paddle design provides for easy
aimming and is a decorative element.
Integral electronic transformer.
HM1-846 50w
HM1-846L 75w
WAC
HM1-847 Flexrail 1 Low Voltage Fixtures
HM1-847-BZ $96.00 ($82.00 with minimum
order)
HM1-847-PT $96.00 ($82.00 with minimum
order)
HM1-847L-BZ $102.00 ($87.00 with minimum
order)
HM1-847L-PT $102.00 ($87.00 with minimum
order)
Sculpted diecast fixture, unique to
the Flexrail system.
Integral electronic transformer.
HM1-847 50w
HM1-847L 75w
WAC
HM1-849 Flexrail 1 Low Voltage Fixtures
HM1-849-BZ $94.00 ($80.00 with minimum
order)
HM1-849-PT $94.00 ($80.00 with minimum
order)
HM1-849L-BZ $100.00 ($85.00 with minimum
order)
HM1-849L-PT $100.00 ($85.00 with minimum
order)
Diecast fixture, with styled yoke, unique
to the Flexrail 1 system.
Integral electronic transformer.
HM1-849 50w
HM1-849L 75w
WAC
HM1-856 Flexrail 1 Low Voltage Fixtures
HM1-856-BZ $94.00 ($80.00 with minimum
order)
HM1-856-PT $94.00 ($80.00 with minimum
order)
HM1-856L-BZ $100.00 ($85.00 with minimum
order)
HM1-856L-PT $100.00 ($85.00 with minimum
order)
Art Deco styling with die cast aluminum
body and shade.
Use either MR16G lamps, or use the LENS-16-CLIP
with open MR16 lamps.
The LENS-16-CLIP includes a clear glass
lens, which may be substituted with an
accessory lens and honeycomb louver.
Integral electronic transformer.
HM1-856 50w
HM1-856L 75w
WAC
HM1-876 Flexrail 1 Low Voltage Fixtures
HM1-876-BZ $88.00 ($75.00 with minimum
order)
HM1-876-PT $88.00 ($75.00 with minimum
order)
HM1-876L-BZ $94.00 ($80.00 with minimum
order)
HM1-876L-PT $94.00 ($80.00 with minimum
order)
High tech styled fixture with aiming
wand.
Adjustable lens holder.
Integral electronic transformer.
HM1-876 50w
HM1-876L 75w
WAC
HM1-936 Flexrail 1 Low Voltage Fixtures
HM1-936-BZ $104.00 ($88.00 with minimum
order)
HM1-936-PT $104.00 ($88.00 with minimum
order)
HM1-936L-BZ $110.00 ($93.00 with minimum
order)
HM1-936L-PT $110.00 ($93.00 with minimum
order)
Model HM1-936 uses PAR36 lamps that
are available in 25w and 50w with beam
spreads from 5° to 55° or the
AR111 lamps from 35w to 75w and beam spreads
from a super spot 4° to a Wide flood
45°.
Integral electronic transformer.
HM1-936 50w
HM1-936L 75w
WAC Flexrail 1 Line Voltage
Fixtures
WAC
HM1-150 Flexrail 1 Line Voltage Fixtures
HM1-150-BZ $91.00 ($77.00 with minimum
order)
HM1-150-PT $91.00 ($77.00 with minimum
order)
Model 150 is a wall wash fixture that features
a die cast body and baffle for superior
rigidity and heat dissipation.
WAC
HM1-720 Flexrail 1 Line Voltage Fixtures
HM1-720-BZ $64.00 ($54.00 with minimum
order)
HM1-720-PT $64.00 ($54.00 with minimum
order)
The die cast aluminum 720 features our
patented cast swivel, stem and locking knob
that provide positive aiming.
Designed for use with PAR20 lamps.
WAC
HM1-730 Flexrail 1 Line Voltage Fixtures
HM1-730-BZ $68.00 ($58.00 with minimum
order)
HM1-730-PT $68.00 ($58.00 with minimum
order)
The die cast aluminum 730 features our
patented cast swivel, stem and locking knob
that provide positive aiming.
Designed for use with PAR30 lamps.
WAC
HM1-738 Flexrail 1 Line Voltage Fixtures
HM1-738-BZ $73.00 ($62.00 with minimum
order)
HM1-738-PT $73.00 ($62.00 with minimum
order)
The die cast aluminum 738 features our
patented cast swivel, stem and locking knob
that provide positive aiming.
Designed for use with PAR38 lamps.
WAC
HM1-773 Flexrail 1 Line Voltage Fixtures
HM1-773-BZ $64.00 ($54.00 with minimum
order)
HM1-773-PT $64.00 ($54.00 with minimum
order)
Model 773 has an Art Deco look, and is
designed with a sturdy diecast body and
a heavy spun light shade. For use with PAR20
lamps.
WAC
HM1-774 Flexrail 1 Line Voltage Fixtures
HM1-774-BZ $68.00 ($58.00 with minimum
order)
HM1-774-PT $68.00 ($58.00 with minimum
order)
Model 774 has an Art Deco look, and is
designed with a sturdy diecast body and
a heavy spun light shade. For use with PAR30
lamps.
WAC
HM1-775 Flexrail 1 Line Voltage Fixtures
HM1-775-BZ $72.00 ($61.00 with minimum
order)
HM1-775-PT $72.00 ($61.00 with minimum
order)
Model 775 has an Art Deco look, and is
designed with a sturdy diecast body and
a heavy spun light shade. For use with PAR38
lamps.
WAC
HM1-783 Flexrail 1 Line Voltage Fixtures
HM1-783-BZ $76.00 ($65.00 with minimum
order)
HM1-783-PT $76.00 ($65.00 with minimum
order)
The 783 is used with PAR20 lamps, and has
a spun aluminum body with distinctive vents.
It's design is unique to the Flexrail 1
system.
WAC
HM1-784 Flexrail 1 Line Voltage Fixtures
HM1-784-BZ $80.00 ($68.00 with minimum
order)
HM1-784-PT $80.00 ($68.00 with minimum
order)
The 784 is used with PAR30 lamps, and has
a spun aluminum body with distinctive vents.
It's design is unique to the Flexrail 1
system.
WAC
HM1-785 Flexrail 1 Line Voltage Fixtures
HM1-785-BZ $84.00 ($71.00 with minimum
order)
HM1-785-PT $84.00 ($71.00 with minimum
order)
The 785 is used with PAR38 lamps, and has
a spun aluminum body with distinctive vents.
To Order:
