Tech Lighting MonoRail finishes

MonoRail is a hand-bendable low-voltage system. It is available in four Finishes: Antique Bronze, Chrome and Satin Nickel.

MonoRail is Low-voltage conductor of two individual conductive metal pieces fused together by a plastic separator. Hand-bendable, field-cuttable Wall MonoRail is rated for 300 watts at 12 volts, 600 watts at 24 volts. Each piece of rail is shipped with conductive connectors to join rail pieces end to end. Order additional connectors if cutting and rejoining rails. Standard MonoRail bends horizontally to a radius as small as 6" and vertically to a radius as small as 24".

Color: Insulator is available in clear and brown.

Finish: Antique bronze, chrome, Satin Nickel.

Tech Lighting Wall MonoRail Pricing >

Tech Lighting Wall Georgi 700WMGRG

Clamps to Wall MonoRail. 18" long 3" high gentle curve. Pivots at head to direct the beam.

System: Available for Wall MonoRail only.

Finish: Antique bronze, chrome, satin nickel.

Lamp: Low-voltage Halogen MR16 lamp up to 75 watts (not included).

Compatible Accessories & Optical Controls: Backlight Shield, Barndoors, Cone Glass Shield, Eggcrate Louver, Flight Paper, Glass Lens, Lil Egypt, Lil Wok, Louver Lens Holder, MR16 Snout, Round Glass Shield, Snap Louver Lens Holder, or Wild Thing. (sold separately)

Tech Lighting Wall MonoRail Pricing >
Accessories & Optical Controls Pricing >

Tech Lighting Wall Telescope 700WMTEL

Telescopes from 9" to 25". Pivots at head to direct the beam. Clamps to Wall MonoRail.

System: Available for Wall MonoRail only.

Finish: Antique bronze, chrome, satin nickel.

Lamp: Low-voltage Halogen MR16 lamp up to 75 watts (not included).

Accessories & Optical Controls: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Lens Holder, Eggcrate Louver, Glass Lens (sold separately).

Tech Lighting Wall MonoRail Pricing >
Accessories & Optical Controls Pricing >

Tech Lighting Wally Lite 700WMWAL

Clamps to Wall MonoRail. Pivots at head to direct the beam. Available in two Lengths, specify 12" or 24" Length.

System: Available for Wall MonoRail only.

Finish: Antique bronze, chrome, satin nickel.

Lamp: Low-voltage Halogen MR16 lamp up to 75 watts (not included).

Accessories & Optical Controls: Wild Thing, Sun Louver, Flight Paper, MR16 Snout, Round Glass Shield, Cone Glass Shield, Lil Egypt, Lil Wok, Barndoors, Backlight Shield, Louver Lens Holder, Snap Louver Lens Holder, Eggcrate Louver, Glass Lens (sold separately).

Tech Lighting Wall MonoRail Pricing >
Accessories & Optical Controls Pricing >

700WMOCHED Tech Lighting Wall MonoRail FreeJack Connector

Adapts any FreeJack head to Tech Lighting’s Wall MonoRail system. For Wall MonoRail only.

• Two-piece connector unscrews to install around Wall MonoRail; FreeJack male connector fits into bottom and twists to tighten.
• Chrome, Satin Nickel.
• Any FreeJack head (sold separately).

Enables Free Jack Pendants and Free Jack Heads to be used with Wall MonoRail.

Tech Lighting Wall MonoRail Pricing >

How do I design my own Wall MonoRail?

First: Choose Wall MonoRail heads.
Choose accessories, if desired.
Choose lamps, 12 or 24 volt, that do not exceed maximum wattage of element or accessory.
Choose finish of system.

Use a scaled drawing as a reference.

a) Decide where you want the rail to run.
b) Sketch it to scale, so you know what Length you want.
Measure Length of Wall MonoRail run; determine quantity and Length of MonoRail pieces required.
Specify one pair of End Caps for each open end of run.
Determine number of Standoffs needed, one for every three feet of run.

Select Either

Remote Transformer
Choose:
Magnetic or electronic
12 volt or 24 volt
Single or dual-feed Specify a Power Feed Canopy, single or dual-feed. (if using a dual feed transformer be sure to order two canopies)

OR

Surface Transformer
Note: if using a Kable Lite Surface Transformer the transformer must be mounted adjacent to run.
Choose:
Magnetic or electronic
12 volt or 24 volt
Single Specify a Center Power Feed or End Power Feed Connector and determine part number.

*Wattage of the transformer must meet or exceed wattage of lamps.

If powering system with more than one transformer, add Isolating Connectors to isolate the feeds from each other.

Mounting:
Order Wall MonoRail Standoffs.

This outline covers only the most common Wall MonoRail applications. For other system options, call us at 954-456-1006.

Tech Lighting Wall MonoRail Pricing >