Long-lasting Xenon technology in a surface mount/recessed,
die cast aluminum fixture. The most versatile wall fixture
made. Recessed or Surface Mounted, available in three
cover options and four color options.
Applications
Interior steps
Exterior steps
Aisles
Halls
Paths
Patio lighting
Entry lighting
Post lighting
Features
Can be surface mounted or recessed into any hole
5" Width and 3" deep
"Knock-off" surface mounting tabs
Three cover designs, Louver, Prism and Scoop
Four cover color options, White, Bronze, Aluminum
and Black
10,000-hour bulb life
110V Power Input
Integral 12V class 2 transformer in each fixture
Die cast aluminum can and cover; suitable for concrete
pour
UL listed for wet location and IC locations
Frosted glass lens
Bulb replacement has low voltage safety
110V push-in connectors included for ease of power
input
Each fixture ships complete with can and cover
Xenon Advantages
Less relamping. Four times the bulb life of Halogen.
10,000-hour average bulb life of Xenon vs. 2,500-hour
average bulb life for Halogen or Incandescent
Replacement lamps half the cost of 110V Halogen
Does not emit harmful UV rays
Produces less heat. Burns significantly cooler
than Halogen
Considerably safer due to less pressure in bulb
vessel
Does not require tempered glass cover
Dimmable
Handling or dimming bulb does not affect bulb life
as in Halogen
Xenon Wall Light
XWL-L-(color)
Louver: White, Bronze, Aluminum and Black
$67.95
XWL-S-(color)
Scoop: White, Bronze, Aluminum and
Black
$67.95
XWL-P-(color)
Prism: White, Bronze, Aluminum and
Black
$67.95
XWL-CC
Wall Light Concrete Cap
Concrete pour of NSL's XSL, XBL, XWL, LSL, LBL
fixtures is now a snap with this well engineered
accessory.
$6.00
Replacement Bulb
XEN-12-18W
12 volt, 18 watt Clear Xenon Replacement
Bulb
$3.00
Drill Bit
XWL-DRILL
5" Width, 1.5" deep
hole Drill bit
$30.00
Features
Dimensions
Cover
W
D
Louver
6.375"
.75"
Prism
6.375"
.625"
Scoop
6.375"
1.5"
Can
With surface mounting tabs removed
4.875"
3"
Can
With surface mounting tabs
6.25"
3"
Hole
5"
3"
Specifications
Voltage
110V. Integral Class 2 12V transformer per fixture
Bulb Specifications
18W wedge base Xenon. 1 bulb per fixture
Average Bulb Life
10,000 hours
Cover finish
White, Bronze, Aluminum and Black
Can finish
White with white reflector
Construction
Both cover and can are die cast aluminum for corrosion protection, strength,
weight and consistency of finish
Lens
Frosted glass
Wiring Options
110V can be parallel wired up to 1188 watts, 66 bulbs. One wire between
each fixture completes chain. No custom cord required. Check local code
and NEC for wiring selection
Agency Approval
UL listed and labeled wet and IC locations. Wall or surface mount only.
To Order:
