 Hadco
CB100 Composite Brick Light
120 Volt
CB100AK5IE Black
CB100HK5IE Bronze
- 120 Volt
- 40 watt maximum
- T10 Lamp
CB100AK5F13E Black
CB100HK5F13E Bronze
- 120 Volt
- 13 watt maximum
- PLC13 Lamp
12 Volt
CB100AK5812 Black
CB100HK5812 Bronze
- 12 Volt
- Two 18 watt maximum
- Two 1141 Lamps (included)
- Remote transformer required
Housing– Back box aluminum die casting containing less
than .3% copper to prevent corrosion in concrete applications.
Face plate is injection molded Ryton composite.
Fasteners– Captive, black oxide stainless steel.
Gasket– Single-piece molded silicone.
Finish– Color impregnated material in black or bronze.
Lens– Frosted tempered glass.
Socket– Incandescent, medium base; fluorescent, GX23-2
base; low voltage, single contact bayonet (S-8).
Ballast– Fluorescent shall be core and coil, NPF Class
B. Ballasts shall be factory wired and tested. Ballasts
rated for 0°C starting temperature.
Wiring Compartment– Internal wiring compartment contains
two (2) 1/2" N.P.S. conduit taps in the bottom
and one (1) 1/2" N.P.S. conduit tap in both sides.
Sockets pre-wired with high temperature #18 wire, low
voltage models pre-wired with 6-ft. cord and quick connector.
UL, cUL Listed.
Box Dimensions
8-1/4" (210mm) Long
2-5/8" (57mm) High
3-1/2" (89mm) Deep
Power
Consoles, Transformers & Accessories >
Accessories– Mounting Kits |
Catalog |
Application |
MAKM
MAKNS
MAKES |
Masonry
New Stud Wall
Existing Stud Wall |
Note: All units supplied with mounting
hardware for concrete pour installation. If other
mounting kits are required, order accessory above.
Note: Thermal protection is required
for interior or insulated walls for all BrickLytes
with the exception of fluorescent. Add suffix
“P" to ordering number. |
|
To Order:
