Cloud Collection from American Fluorescent

American Fluorescent MAR Square Floating Cloud

These white cloud fixtures have a box-style shape with rounded edges and corners for a softer appearance. Available in seven sizes, two 2-foot square models, two 4-foot by 1-foot models, one 4- foot by 2-foot model, and two 4-foot square models.

• Full sized diffuser and housing
• Smooth white acrylic diffuser
• Lift and shift ceiling mount
• Order diffuser and housing separately
• Electronic E8 commercial grade ballast

All units with model numbers ending in ES are wired with U.L. listed high power factor, rapid start, Class P, energy saving (ES) full light output, ballasts, for 120 volt, 60 hertz A.C. operation.

All non-rapid start units have trigger start, normal power factor ballasts. Lamp holders are rotating. Lampholders are rotating lock, medium bi-pin type. All fixtures are U.L. listed.

Housing and cover are die formed of 22 gauge cold rolled steel, and corners are spot welded for rigidity. Standard mounting holes and standard wiring knockouts are included.

Housing interior is finished in lighting grade white baked gloss enamel paint. Exterior is available in white or black baked gloss enamel.

Lens is made from a sheet of cast translucent white 100% virgin acrylic, .125" thick, formed into a reverse square cloud with a stipple finish interior and a smooth finish exterior. Four steel clips on two edges of the diffuser allow it to lift and shift onto the housing lip.

For ballast upgrades and options, contact us. Other voltages, listings, and ratings available on request .

American Fluorescent MAR Economy Series Square Edge Floating Cloud

These white cloud fixtures have a box-style shape with rounded edges and corners for a softer appearance. Available in two sizes which use (2) 48" lamps and (4) 48" lamps.

• Molded white acrylic diffuser.
• Economy sized chassis.
• Lift and Shift ceiling mount.
• ENERGY STAR qualified
• Can be ordered with a residential R8 or commercial E8 grade ballast

All units with model numbers ending in ES are wired with U.L. listed high power factor, rapid start, Class P, energy saving (ES) full light output, ballasts, for 120 volt, 60 hertz A.C. operation. Lampholders are rotating lock, medium bi-pin type. All fixtures are U.L. listed.

Housing, cover and ends are die formed of 22 gauge cold rolled steel. Standard mounting holes and standard wiring knockouts are included, with an extra 2" Width center knockout on the back for wiring entry.

Housing interior and exterior are finished in lighting grade white baked gloss enamel paint.

Lens is made from a sheet of cast translucent white 100% virgin acrylic, .125" thick, formed into a reverse square cloud with a stipple finish interior and a smooth finish exterior. Four steel clips on two edges of the diffuser allow it to lift and shift onto the housing lip.

For ballast upgrades and options, contact us. Other voltages, listings, and ratings available on request .

American Fluorescent Round Floating Cloud

These round, white, drum shaped cloud fixtures can be used in a Wide variety of locations. Two 1-lamp circline and two 2-lamp circline models are available. Three additional models are available using (1), (2), or (3) 13 watt twin tubes.

• C2000 series
• Smooth white molded drum profile acrylic
• All white steel housing • Electronic or magnetic ballast options
• UL listed for damp locations
• Lamps included
• Available in black, chrome, brass, or other custom color finishes

All "CIRCLINE" units are wired with U.L. listed normal power factor, rapid start, Class P ballasts, for 120 volt, 60 hertz A.C. operation. Ballasts are provided in a white can to minimize shadowing. Circline sockets are 4-pin straight insertion type. Lamp retention is provided with 3 spring clips per lamp.

All "COMPACT FLUORESCENT" units are wired with U.L. listed, normal power factor, preheat type, Class P ballasts, for 120 volt, 60 hertz A.C. operation. Lampholders are 2-pin, GX23 base for 13 watt lamps only. Power supply connections must be made inside a junction box (not provided). All fixtures are U.L. listed DAMP LOCATION.

Housing is die formed of 22 gauge cold rolled steel. Standard back (top) with universal keyhole slots for mounting and wiring holes for electrical connection.

Interior and exterior are finished in lighting grade white baked gloss enamel paint.

The lens is injection molded of 100% virgin translucent white acrylic, with a smooth finish. Thickness is .100" Lens is held in place by three thumbscrews in the housing.

Housing is also available in black, chrome, brass, or other custom color finishes . Diffuser is also available in smooth white polycarbonate . Ballast upgrades and options available . Other voltages, lamps, listings, and ratings available on request .

American Fluorescent Shallow Mushroom Style Cloud CMS Series

These round, white, shallow mushroom shaped fixtures have a profile that is 21.2" shorter than our standard mushroom shaped cloud. They can be ceiling or wall mounted. Two 1-lamp circline and two 2-lamp circline models are available. Three additional models are available using (1), (2), or (3) 13 watt twin tubes.

• CMS Series
• Shallow cloud with smooth white molded acrylic diffuser
• All white steel housing
• Electronic or magnetic ballast options
• UL listed for damp locations
• Can be wall mounted (ADA Compliant)
• Lamps included

All “CIRCLINE" units are wired with U.L. listed normal power factor, rapid start, Class P ballasts, for 120 volt, 60 hertz A.C. operation. Ballasts are provided in a white can to minimize shadowing. Circline sockets are 4-pin straight insertion type. Lamp retention is provided with 3 spring clips per lamp.

All "COMPACT FLUORESCENT" units are wired with U.L. listed, normal power factor, preheat type, Class P ballasts, for 120 volt, 60 hertz A.C. operation. Lampholders are 2-pin, GX23 base for 13 watt lamps only. Power supply connections must be made inside a junction box (not provided). All fixtures are U.L. listed DAMP LOCATION.

Housing is die formed of 22 gauge cold rolled steel. Standard back (top) with universal keyhole slots for mounting and wiring holes for electrical connection.

Interior and exterior are finished in lighting grade white baked gloss enamel paint.

The lens is injection molded of 100% virgin translucent white acrylic, with a smooth finish. Thickness is .100" Lens is held in place by three thumbscrews in the housing.

Housing is also available in black, chrome, brass, or other custom color finishes . Ballast upgrades and options available . Other voltages, lamps, listings, and ratings available on request .

American Fluorescent Modern Low Profile Cloud RB Series

These modern, low profile white cloud fixtures have an updated look with ivory marble, white marble or basic white end caps. The smooth white acrylic diffuser is designed to hug the ceiling. They are available in two-lamp and four-lamp models, and use 48" T8 lamps.

• RB Series
• Smooth white acrylic diffuser that hugs the ceiling
• Lift and shift ceiling mount
• Electronic ballast

All units are wired with U.L. listed high power factor, rapid start, Class P, electronic ballasts for “T8 Octron" lamps at 120 volt, 60 hertz A.C. operation. Lampholders are straight snap in insertion, medium bi-pin type. All fixtures are U.L. listed for damp location.

Housing, cover and ends are die formed of 22 gauge cold rolled steel. Standard mounting holes and standard wiring knockouts are included, with an extra 2" Width center knockout on the back for wiring entry.

Housing interior and exterior are finished in lighting grade white baked gloss enamel paint.

Lens is made from smooth translucent white 100% virgin acrylic, .125" thick, extruded into a soft rounded shape. End caps are injection molded smooth acrylic with a faux marble pattern. Returns on edges of the diffuser allow it to lift and shift onto the housing lip.

Custom end cap colors and two-foot fixtures also available . For ballast options, refer to back of guide. Other voltages, listings, and ratings available on request .

American Fluorescent Contemporary Floating Cloud RC Series

These white cloud fixtures have rounded corners and edges for a soft pillow appearance. Five different models to choose from including (2) 4-foot by 1-foot units, (2) 2-foot square units, and (1) 4-foot by 2-foot unit.

• Full sized diffuser and housing
• White acrylic diffuser with contoured edge
• Lift and shift ceiling mount
• Order diffuser and housing separately
• Electronic E8 commercial grade ballast

All units with model numbers ending in ES are wired with U.L. listed high power factor, rapid start, Class P, energy saving (ES) full light output, ballasts, for 120 volt, 60 hertz A.C. operation.

All non-rapid start units have trigger start, normal power factor ballasts. Lampholders are rotating lock, medium bi-pin type. All fixtures are U.L. listed.

For ballast upgrades and options, refer to back of guide. Other voltages, listings, and ratings available on request .

Housing and cover are die formed of 22 guage cold rolled steel, and corners are spot welded for rigidity. Standard mounting holes and standard wiring knockouts are included.

Housing interior is finished in lighting grade white baked gloss enamel paint. Exterior is available in white or black baked gloss enamel.

Lens is made from a sheet of cast translucent white 100% virgin acrylic, .125" thick, formed into a reverse cloud puff shape with a stipple finish interior and a smooth finish exterior. Four steel clips on two edges of the diffuser allow it to lift and shift onto the housing lip.

American Fluorescent Contemporary Cloud RC Economy Series (reduced to fit on economy sized housing)

These white cloud fixtures have rounded corners and edges for a soft pillow appearance. Available in three sizes which use (2) 48" lamps, (4) 24" lamps and (4) 48'' lamps.

• White acrylic diffuser with contoured edge
• Lift and shift ceiling mount
• Available in electronic residential R8 or E8 commercial grade ballast

All units with model numbers ending in ES are wired with U.L. listed high power factor, rapid start, Class P, energy saving (ES) full light output, ballasts, for 120 volt, 60 hertz A.C. operation.

All non-rapid start units have trigger start, normal power factor ballasts. Lampholders are rotating lock, medium bi-pin type. All fixtures are U.L. listed.

Housing, cover and ends are die formed of 22 gauge cold rolled steel. Standard mounting holes and standard wiring knockouts are included, with an extra 2" Width center knockout on the back for wiring entry.

Housing interior and exterior are finished in lighting grade white baked gloss enamel paint.

Lens is made from a sheet of cast translucent white 100% virgin acrylic, .125" thick, formed into a reverse cloud puff shape with a stipple finish interior and a smooth finish exterior. Four steel clips on two edges of the diffuser allow it to lift and shift onto the housing lip.

For ballast upgrades and options, refer to back of guide. Other voltages, listings, and ratings available on request .

American Fluorescent Cloud Vanity V8PN Series

These narrow style, white cloud vanity fixtures have rounded corners and edges for a soft pillow appearance. They feature a fully enclosed housing, and an electronic ballast for instant-on, quiet operation. Three sizes to choose from measuring approximately 26", 38", or 50" in Length. Each model uses (2) T8 lamps.

• White acrylic diffuser fully encloses housing
• Wall, ceiling, vertical and/or horizontal mounting
• Available in R8 residential or E8 commercial grade ballast

All units are wired with U.L. listed high power factor, rapid start, Class P, electronic ballasts for “T8 Octron" lamps at 120 volt, 60 hertz A.C. operation. Lampholders are straight snap in insertion, medium bipin type. All fixtures are U.L. listed for damp location.

For ballast options, refer to back of guide. Other voltages, listings, and ratings available on request .

These narrow style, white cloud vanity fixtures have rounded corners and edges for a soft pillow appearance. They feature a fully enclosed housing, and an electronic ballast for instant-on, quiet operation. Three sizes to choose from measuring approximately 26", 38", or 50" in Length. Each model uses (2) T8 lamps.

Housing, cover and ends are die formed of 22 gauge cold rolled steel. Standard mounting holes and wiring knockouts are included. Can be hung horizontally or vertically on the wall, or ceiling mounted.

Housing interior and exterior are finished in lighting grade white baked gloss enamel paint.

Lens is made from a sheet of cast translucent white 100% virgin acrylic, .125" thick, formed into a narrow reverse cloud puff shape with a stipple finish interior and a smooth finish exterior. Diffuser attaches with a white screw in each end, completely enclosing the housing.

American Fluorescent Contemporary Floating Cloud Vanity VPN Series

These white cloud vanity fixtures have rounded corners and edges for a soft pillow appearance. They feature a fully enclosed housing, and they come in three sizes to choose from measuring approximately 26", 38", or 50" in Length. Each model uses (2) T12 lamps.

• Distinctive white acrylic diffuser with rounded edges
• Wall or ceiling mount
• Completely wired and ready for installation
• Electronic ballast

All ES units are wired with U.L. listed high power factor, rapid start, Class P, (ES) full light output, ballasts for 120 volt, 60 hertz A.C. operation. All non-ES units have trigger or rapid start high power factor ballasts. Lampholders are rotating lock, medium bi-pin type. All fixtures are U.L. listed for damp location.

For ballast options, refer to back of guide. Other voltages, listings, and ratings available on request .

Housing, cover and ends are die formed of 22 gauge cold rolled steel. Standard mounting holes and wiring knockouts are included. Can be hung horizontally or vertically on the wall, or ceiling mounted.

Housing interior and exterior are finished in lighting grade white baked gloss enamel paint.

Lens is made from a sheet of cast translucent white 100% virgin acrylic, .125" thick, formed into a reverse cloud puff shape with a stipple finish interior and a smooth finish exterior. Diffuser attaches with a white screw in each end, completely enclosing the housing.