To Order:
Call 800-585-1285 Monday to Friday 9 to 5 EST Saturday 10 to 5 EST Sunday Closed
or sales@brandlighting.com Se habla Español
We speak English
We speak Spanish
We speak Russian
We speak Hebrew
The perfect mini light for outlining and illuminating
architectural features located almost anywhere indoors
or outdoors. Offered in 5 LED colors and 4 cover colors.
UL Listed for all wet, IC, ceiling and direct burial
applications.
A medium
size wall mounted fixture designed to reflect the brightness
of 22 LEDs into a soft diffused illumination for steps,
aisles, halls, paths and sidewalks. Offered in 4 LED
colors and 2 cover colors. LED Reflective Light is UL
Listed for wet and IC locations.
A flexible light strip designed to fit perfectly into
any NSL mounting extrusion for an elegant finished look
to the edge of steps, aisles and awnings.
Environmentally friendly, hydrocarbon-free LED Lighting
uses 90% less power than ordinary lights. "Crystal"
lens creates unique sparkle effect. NSL LED Crystal
Light strings may be connected end to end up to 210
LEDs, 3 strings.
NSL
LED Globe Lights
A flexible marquee string with LED long
life technology, ultra low energy consumption,
and 200 foot maximum run!
The scoop cover version of NSL's popular
LED MiniDisc Light The perfect mini light
for outlining and illuminating architectural
features located almost anywhere indoors
or outdoors. Offered in 5 LED colors and
4 cover colors.
With energy usage a low 0.54 watt per
fixture and LED live of 60,000 hours, LED
MiniDisc are UL Listed for all wet, IC,
ceiling and direct burial applications.
A surprising total of 100 fixtures can be
powered from just one 60W Class 2 LED Driver.
Applications
Steps
Aisles
Paths
Driveways
Direction Lighting
Information Lighting
Decorative Lighting
Merchandising
Landscape Accents
Features
60,000 hours LED life
Low energy requirements 0.54 watts per
fixture
UL listed for in-wall, in-floor, outdoor
wet and outdoor burial applications
A medium size wall mounted fixture designed
to reflect the brightness of 22 LEDs into
a soft diffused illumination for steps,
aisles, halls, paths and sidewalks. Offered
in 4 LED colors and 2 cover colors. With
energy usage a low 2.5 watts per fixture
and an average LED life of 60,000 hours,
LED Reflective Light is UL Listed for wet
and IC locations. A remarkable total of
250 fixtures can be parallel wired (daisy
chained") from one 110VAC tap.
110VAC input and output. Does not require
an LED Driver. Up to 250 LED Reflective
Lights per 110VAC tap.
Applications
Interior steps
Exterior steps
Aisles
Halls
Paths
Patio lighting
Entry lighting
Post lighting
Features
60,000 hours LED life
110VAC power input and output
Low energy requirements 2.5 watts per
fixture
UL listed for wet and IC locations
Two cover colors: White and Aluminum
Four LED Color Options: White, Blue,
Green and Amber
360º adjustable head
Flexible steel arm. Light source is directable
in virtually any direction
Rocker switch on wall plate
This item includes a 4" Diameter
mounting plate. (Not Shown)
Fixture dimensions: 4" W x 20"
H Max Height x 1 ¼" to 16 ½"
Proj.
Light source Diameter is 3"
30 x .073W LED = 2.2W LED 120V
Suspended crystal and stainless steel spheres
mingle to create the unique and bold Galaxy
collection. Available in Chemical Bronze
or Stainless Steel finish. Cut crystal bowls
with Crystal drops.
Dimensions: 15.35" D x 14" H
(3) 100-watt med. base
Suspended crystal and stainless steel spheres
mingle to create the unique and bold Galaxy
collection. Available in Chemical Bronze
or Stainless Steel finish. Cut crystal bowls
with Crystal drops.
6140CB /BSKT $1,438.00
Finish: Chemical Bronze, above
Dimensions: 36.5" D x 8.25" H
Lamping: (1) 150-watt halogen & (12)
LED bulbs (included)
Finishes: Chemical Bronze (shown)
Also available in Stainless Steel.
Shades: Crystal drum shade shown
Crystal: Cut crystal bowl and crystal basket
available
Kalco
Star Gazer Semi Flush Ceiling Light 6205CB
$2,248.00
This exotic crystal halogen ceiling light
uses 150 watt halogen and 12 LED lamps. It
includes clear crystal spheres and a crystal
basket. Available in Chemical Bronze finish.
Crystal basket included.
Dimensions: 30" D x 12" H
Lamping: (1) 150-watt halogen lamp &
(12) LED bulbs (included)
Finishes: Chemical Bronze (shown)
Available only in the finish shown.
Crystal: Crystal basket included
Terzani
Anastacha Table Lamp
ØM74B H4 A9 Brushed Nickel with
Clear $2,200.00
ØM74B H4 D3 Brushed Nickel with Black
$2,295.00
20.9" x Ø7.5" x Ø13.4"
Shade: 11.8"
Brushed finish nickel-plated finish metal
table lamp with black or transparent plexiglass
diffusers.
Pre-Wired with UL Listed Direct Burial
Wire/Cable
Remote 12V Transformer Not Included
ETL Approved
Dimensions: 29 5/8" including Flexible
Arm
Head 5" x 3"
Mount 2 5/8"
NSL
Micro LED Light Strip
A flexible light strip designed with 10mm
x 10mm square profile to fit perfectly into
any NSL mounting extrusion for an elegant
finished look to the edge of steps, aisles
and awnings. Low voltage Micro LED is offered
in 10VDC, five exciting colors and six pre-assembled
Lengths. With a low energy usage of 1.2
watts per foot and a 60,000 hour LED life,
low voltage Micro LED is UL Listed for indoor
and outdoor applications. A total of 50
feet can be powered from one NSL 60W Class
2 LED Driver.
The perfect mini light for outlining and
illuminating architectural features located
almost anywhere indoors or outdoors. Offered
in 5 LED colors and 4 cover colors.
With energy usage a low 0.54 watt per
fixture and LED live of 60,000 hours, LED
MiniDisc are UL Listed for all wet, IC,
ceiling and direct burial applications.
A surprising total of 100 fixtures can be
powered from just one 60W Class 2 LED Driver.
Applications
Steps
Aisles
Paths
Driveways
Direction Lighting
Information Lighting
Decorative Lighting
Merchandising
Landscape Accents
Features
60,000 hours LED life
Low energy requirements 0.54 watts per
fixture
UL listed for in-wall, in-floor, outdoor
wet and outdoor burial applications
Up to 100 fixtures per power supply
LED Color Options: White, Blue, Green,
Amber and Red
Cover Color Options: Aluminum, Bronze,
White and Black
LED Technology in a die cast aluminum Step
Light Fixture, corrosion-proof die cast
aluminum design. Available in four colors
and three cover styles. All sold only as
complete unit, cover and can.
Applications
Interior steps
Exterior steps
Aisles
Halls
Paths
Patio lighting
Entry lighting
Post lighting
Ceilings
Showers
Features
Low 6.5 watts per fixture energy usage
Up to 120 fixtures per 110VAC tap
UL Listed for wall, IC, ceiling and
shower locations
Three cover designs, Louver, Prism
and Scoop
Four cover color options, White, Bronze,
Aluminum and Black
60,000-hour bulb life
110V Power Input
Integral LED Driver in each fixture
Frosted glass lens
Die cast aluminum can and cover; suitable
for concrete pour
UL listed for wet location and IC locations
Frosted glass lens
110V push-in connectors included for
ease of power input
LED Technology in a brick-size die cast
aluminum Step Light Fixture Use in all applications
where a more linear fixture meets design
requirements. Available in four colors and
three cover styles. All sold only as complete
unit, cover and can.
Applications
Brick walls
Interior steps
Exterior steps
Aisles
Halls
Paths
Patio lighting
Entry lighting
Post lighting
Features
Low 5.0 watts per fixture energy usage
Up to 150 fixtures per 110VAC tap
3 cover designs: Louver, Prism and
Scoop
4 cover color options: White, Bronze,
Black or Aluminum
60,000-hour average LED life
110V Power Input
Integral LED Driver in each fixture
Die cast aluminum can and cover; suitable
for concrete pour
UL listed for wet and IC locations
Frosted glass lens
110V push-in connectors included for
ease of power input
Kichler Deck LED 2W Louver Face
Brick Landscape Light 15773AZT
Kichler Deck LED 2W Louver
Face Brick Landscape Light 15773AZT
Designed to be integrated into a brick
wall during construction. LED version is
also usable in vertical risers. Casts a
low, even spread of energy efficient LED
light.
No remote driver required to operate these
LED fixtures
Finish: Textured Architectural Bronze
Height 4" x Length 4" x Width
9.5"
Housing: Die cast aluminum with a fully
sealed heat-resistant glass lens
Wiring: Wire connection must be made inside
junction box.
Light Source: Illumination provided by integrated
3.2-Watt LED chips
Voltage: 12
Diffuser Description: Tempered Soda Lime
Glass, Frosted on one side
Body Material: Aluminum
Kichler Deck LED 2W Glass Lens
Brick Landscape Light 15774AZT
Kichler
Deck LED 2W Glass Lens Brick Landscape Light
15774AZT
Designed to be integrated into
a brick wall during construction. LED version
is also usable in vertical risers. Casts
a low, even spread of energy efficient LED
light.
No remote driver required to operate these
LED fixtures
Finish: Textured Architectural Bronze
Height 4" x Length 3.76" x Width
9.5"
Housing: Die cast aluminum with a fully
sealed heat-resistant glass lens
Wiring: Wire connection must be made inside
junction box.
Light Source: Illumination provided by integrated
3.2-Watt LED chips
Voltage: 12
Diffuser Description: Tempered Soda Lime
Glass, Frosted on one side
Body Material: Aluminum
An excellent durable choice for commercial
or residential lighting.
Material: Rated Drive-Over Glass
Lamp: LED 4W 12V Multi-Color included
Pre-Wired with UL Listed Direct Burial Wire/Cable
ETL Approval Pending
Dimensions: Top 3 5/8"
Outside Dimension 4" x 4"
Height 2 3/8"
Socket 1 1/2"
LVT25 - Transformer with Controller Required,
Sold Separately
Dabmar
LV-LED60 Recessed Brick, Step and Wall Light
An excellent durable choice for commercial
or residential lighting.
Housing Material: Powder Coated Cast Aluminum
Available Finish: Stainless Steel
Cover Material: Stainless Steel
Lens: Crystal Lens
Pre-Wired with UL Listed Direct Burial Wire/Cable
ETL Approval Pending
Dimensions: 3.25"
Outside Dimension 5.5" x 5.5"
Depth 7/8"
Ordering Information
LV-LED60/B
25 LEDs
3W
Blue
12V
Lamp Included
LV-LED60/G
25 LEDs
3W
Green
12V
Lamp Included
LV-LED60/R
25 LEDs
3W
Red
12V
Lamp Included
LV-LED60/W
25 LEDs
3W
White
12V
Lamp Included
Dabmar
LV-LED01 Solar LED Road Safety Path and
Walkway Light
Perfect for path, walkway, driveway and
entrance area lighting. Cast Aluminum Solar
LED Road Safety Path and Walkway Lights
are an excellent durable choice for commercial
or residential lighting.
Material: Cast Aluminum
Lens: Clear Heat Resistant Plastic Lens
Lamp: Solar Powered LED
Available Lamp Color: White
ETL Approval Pending
Available Finish: Grey
Dimensions: Diameter 6" x Height 10"
Remote 12 Volt Transformer Not Included
P-CN-01 Connector Available, Sold Separately
Dabmar
D5500 LED 5-Tier Pagoda Light
Perfect for path, walkway, driveway and
entrance area lighting. Cast Aluminum Pagoda
Lights are an excellent durable choice for
commercial or residential lighting.
Available Finish: Black, Bronze, Green
or Verde Green
Dimensions: Diameter 6" x Height 10"
P-D5000-10T - 10" Top Adder for D5000-D5200,
Sold Separately
P-D5000-3B - 3" Base Adder for D5000-D5200,
Sold Separately
Hadco
LED Pathlyte (RL4D3)
RL4D3-A LED Horizon Pathlight
Housing: Die-cast aluminum. Stem is extruded
aluminum. 1/2 " NPS male threads to
screw on to accessory mounting stake or
junction box, sold separately. Fasteners
are 300 series stainless steel. Gasketing
is silicone.
Finish: Thermoset polyester powdercoat
is electrostatically applied after a five-stage
conversion cleaning process and bonded by
heat fusion thermosetting. Laboratory tested
for superior weatherability and fade resistance
in accordance with ASTM B-117-64 and ANSI/ASTM
G53-77 specifications.
Optical Assembly: Frosted
tempered glass lens . Spun aluminum reflector
with white thermoset powdercoat.
Lamping: Type 3 Luxeon® high-output
LEDs powered at 700mA to operate for 50,000
hours.
Electrical Assembly: Input voltage range
(VAC): 10.8 - 17.5. Input frequency: 60Hz.
Integral surge protector built into LED
driver circuit. 12 volts, 12.4 total watts.
12 Volt fixture is pre-wired with 3-ft pigtail
of 18-2 AWG, 105° C, SPT-1 wire. Low
voltage quick connector, catalog #LVC3 included
for easy hook-up to the low voltage supply
cable, not included. 12 Volt system requires
remote transformer, not included.
Warranty: Three-year limited warranty.
Certification: UL Listed to U.S. safety
standards for wet locations. cUL Listed
to Canadian safety standards for wet locations.
Manufactured to ISO 9001:2000 Standards.
IP Rating: IP55: Dust-protected and sealed
against water jets.
No remote driver required to
operate these LED fixtures
Textured Architectural Bronze finish
Die Cast Aluminum
15731, 15732, 15741, 15742, 15743,
15751, 15752, 15753 LED Light Emitting Diode
Accent Lights are available in
Textured Architectural Bronze or Textured
Black finish on Aluminum Body and Bronzed
Brass on Brass Body
Textured Black finish Die Cast
Aluminum
Bronzed Brass finish Solid Brass
Kichler
LED Accent Lights
A full collection of accent lights engineered
to provide the spread of light needed with
the amount of lumen output desired.
Constructed in either long lasting die
cast aluminum or solid brass housings, this
latest LED series features threaded mounting
stems and locking nuts to allow for simple
installation.
Kichler also added integral drivers to
each fixture, so there is less equipment
to buy or bury.
Housing: Die-cast aluminum or die cast
brass with clear tempered glass lens and
polycarbonate mounting stem and locknut.
Die cast aluminum with hard coat anodized
and durable powdercoat finish.
Hexagonal housing — 2" hex by
1-1/4" deep. Individual accent light
fixtures have 25 feet of #18-2 direct burial
lead wires. Multi-packs have 25 feet of
#18-2 direct burial lead wire and 12 feet
of #18-2 direct burial wire between each
fixture.
Orbital stem for directional control, with
brass tightening screw.
Finish: Textured Architectural Bronze,
Textured Black or Bronzed Brass
Wiring: 24' of usable #18-2, SPT-1-W leads.
Cable connector supplied with fixture.
Light Source: Illumination provided by integrated
LED chips.
Body Material: Aluminum or Brass
Separate driver is NOT required
with this series. Wire to typical low-voltage
transformer.
15731, 15732, 15741, 15742, 15743,
15751, 15752, 15753 LED Light Emitting Diode
Accent Lights are available in
Textured Architectural Bronze or Textured
Black finish on Aluminum Body and Bronzed
Brass on Brass Body
LED, or Light Emitting Diode, is a diode
that is chip-mounted in a reflector cup
and held in place by a milled steel frame
connected to a pair of electrical wires.
When current flows across the junction of
the two different materials, light is produced
from within the solid crystal chip. Hadco
uses bright white LEDs as standard, which
are developed by coating a blue LED with
a phosphor, and thereby generating a white
color.
Hadco LED fixtures are available in both
low voltage and line voltage, and cover
applications from accent lighting and path
lighting, to step lighting, inground and
underwater lighting. We are proud to be
the leader in developing outdoor landscape
lighting fixtures that are truly viable
in the professional market. Look to HADCO
for Leading Edge Development. This
is a featured article on LED lighting from
www.hadco.com
CL2D2-A LED Contemporary Pathlight
CL2D2-H LED Contemporary Pathlight
Housing: Die-cast aluminum. Gasketed twist
lock top. Stem is extruded aluminum. 1/2
" NPS male threads to screw on to accessory
mounting stake or junction box, sold separately.
Finish: Thermoset polyester powdercoat
is electrostatically applied after a five-stage
conversion cleaning process and bonded by
heat fusion thermosetting. Laboratory tested
for superior weatherability and fade resistance
in accordance with ASTM B-117-64 and ANSI/ASTM
G53-77 specifications.
Lamping: Type 3 Luxeon® high-output
LEDs powered at 700mA to operate for 50,000
hours.
Electrical Assembly: Input voltage range
(VAC): 10.8 - 17.5. Input frequency: 60Hz.
Integral surge protector built into LED
driver circuit. 12 volts, 6.2 total watts.
12 Volt fixture is pre-wired with 3-ft pigtail
of 18-2 AWG, 105° C, SPT-1 wire. Low
voltage quick connector, catalog #LVC3 included
for easy hook-up to the low voltage supply
cable, not included. 12 Volt system requires
remote transformer, not included.
Warranty: Three-year limited warranty.
Certification: UL Listed to U.S. safety
standards for wet locations. cUL Listed
to Canadian safety standards for wet locations.
Manufactured to ISO 9001:2000 Standards.
IP Rating: IP66: Dust-tight and sealed
against direct jets of water.
Height: 21" (533mm)
Width: 4 3/4" (121mm)
Max. Weight: 2.5 lb.
Finish: A Black, H Bronze
A= Black
H= Bronze
RSC2 Louver Steplyte
Line Voltage LED Landscape Step and Deck
Lighting
Hadco
RSC2 Louver Steplyte or Bricklyte
Line Voltage Landscape Step and Deck Lighting
RSC2AK5D3E Louver Steplight with 3 LEDs
RSC2AL5D5E Louver Steplight with 5 LEDs
Select Finish: A Black. B White. H Bronze
or N Natural Brass
Select Optics: K5 Symmetric Optics or L5
Symmetric Optics
Select Wattage: D3 3 x 1W LEDs or D5 5 x
1W LEDs
Fasteners are 300 series stainless steel.
Gasketing is silicone. Recessed housing
contains four (4) 1/2 " NPS conduit
inlets (two (2) on bottom and one on each
side) and internal pull-through wiring compartment.
Die-cast aluminum trim ring contains less
than 0.3% copper to resist corrosion. Cast
bronze fixture has polycarbonate, color
impregnated, dark bronze finish. Die-cast
copper-free aluminum with 45° cutoff,
with frosted tempered glass. Cast bronze
louver is natural cast bronze with frosted
tempered glass. Die-cast aluminum back box
contains less than 0.3% copper to prevent
corrosion in concrete or masonry applications.
Integral and furnished as standard on all
fixtures. This enables fixture to be used
in accordance with NEC Article 680-51 in
installations without an external low-water
cutoff.
Finish: Zinc-rich primer and thermoset
powdercoat for durability. Thermoset polyester
powdercoat is electrostatically applied
after a five-stage conversion cleaning process
and bonded by heat fusion thermosetting.
Laboratory tested for superior weatherability
and fade resistance in accordance with ASTM
B-117-64 and ANSI/ASTM G53-77 specifications.
Optical Assembly: The cast louver offers
lower light levels with cut-off for lighting
stairways or general lighting where shielding
of the light source is more important than
high light levels. Reflector is formed from
highly reflective aluminum. Symmetric.
Lamping: Type 3 Luxeon® high-output
LEDs powered at 700mA to operate for 50,000
hours.
Electrical Assembly: Electronic 120 volt
AC to 12 volt regulated DC, power supply.
Warranty: Three-year limited warranty.
Certification: UL Listed to U.S. safety
standards for wet locations. cUL Listed
to Canadian safety standards for wet locations.
Manufactured to ISO 9001:2000 Standards.
ADA Compliant when used in indoor and outdoor
wall applications.
IP Rating: IP66: Dust-tight and sealed against
direct jets of water.
RSF2 Flat Opal Lens Steplyte or
Bricklyte
Line Voltage LED Landscape Step and Deck
Lighting
Hadco
RSF2 Flat Opal Lens Steplyte or Bricklyte
Line Voltage Landscape Step and Deck Lighting
RSF2AL5D3E Flat Opal Lens Steplight with
3 LEDs
RSF2AL5D5E Flat Opal Lens Steplight with
5 LEDs
Select Finish: A Black or H Bronze
Optics: L5 Symmetric Optics only
Select Wattage: D3 3 x 1W LEDs or D5 5 x
1W LEDs
Die-cast aluminum trim ring contains less
than 0.3% copper to resist corrosion. Cast
bronze fixture has polycarbonate, color
impregnated, dark bronze finish. Die-cast
aluminum back box contains less than 0.3%
copper to prevent corrosion in concrete
or masonry applications.
Finish: Zinc-rich primer and thermoset
powdercoat for durability.
Optical Assembly: Opal Lens - made of
UV stabilized injection molded polycarbonate.
Specular aluminum formed reflector.
Lamping: Type 1 Luxeon® high-output
LEDs powered at 350mA to operate for 50,000
hours. Electrical Assembly: Supply wires
connect directly to the quick connect on
the integral power supply. Electronic 120
volt AC to 12 volt regulated DC, power supply.
Warranty: Three-year limited warranty.
Certification: UL Listed to U.S. safety
standards for wet locations. cUL Listed
to Canadian safety standards for wet locations.
Manufactured to ISO 9001:2000 Standards.
ADA Compliant when used in indoor and outdoor
wall applications.
IP Rating: IP66: Dust-tight and sealed against
direct jets of water.
RSS2 Internal Louver Steplight
or Bricklyte
Line Voltage LED Landscape Step and Deck
Lighting
Hadco
RSS2 Internal Louver Steplyte or Bricklyte
Line Voltage Landscape Step and Deck Lighting
RSS2AK5D3E Internal Louver Steplyte with
3 LEDs
RSS2AK5D5E Internal Louver Steplyte with
5 LEDs
Select Finish: A Black or H Bronze
Optics: K5 Symmetric Optics only
Select Wattage: D3 3 x 1W LEDs or D5 5 x
1W LEDs
Die-cast aluminum back box contains less
than 0.3% copper to prevent corrosion in
concrete or masonry applications. Gasketing
is silicone. Fasteners are 300 series stainless
steel. Note: Recessed housing contains four
(4) 1/2 " NPS conduit inlets (two (2)
on bottom and one on each side) and internal
pull-through wiring compartment. Die-cast
aluminum trim ring contains less than 0.3%
copper to resist corrosion. Clear UV stabilized
injection molded polycarbonate with 45°
louvered screen insert.
Finish: Zinc-rich primer and thermoset
powdercoat for durability.
Optical Assembly: The cast louver offers
lower light levels with cut-off for lighting
stairways or general lighting where shielding
of the light source is more important than
high light levels. Specular aluminum formed
reflector.
Lamping: 13W CFL (GX23D-2). Type 1 Luxeon®
high-output LEDs powered at 350mA to operate
for 50,000 hours. 40W maximum T10 lamps.
Lower wattage lamps are acceptable.
Electrical Assembly: 4kv rated medium base
porcelain socket. Nickel-plated screw shell
with center contact. Electronic 120 volt
AC to 12 volt regulated DC, power supply.
Ballast: Core and coil, NPF, 0° starting
temperature.
Warranty: Three-year limited warranty.
Certification: UL Listed to U.S. safety
standards for wet locations. cUL Listed
to Canadian safety standards for wet locations.
Manufactured to ISO 9001:2000 Standards.
ADA Compliant when used in indoor and outdoor
wall applications.
IP Rating: IP66: Dust-tight and sealed against
direct jets of water.
RSV2 Vertical Louver Steplight
or Bricklyte
Line Voltage LED Landscape Step and Deck
Lighting
Hadco
RSV2 Vertical Louver Steplight or Bricklyte
Line Voltage Landscape Step and Deck Lighting
RSV2AK5D3E Vertical Louver Steplight with
3 LEDs
RSV2AK5D5E Vertical Louver Steplight with
5 LEDs
Select Finish: A Black. B White. H Bronze
or N Natural Brass
Select Optics: K5 Symmetric Optics only
Select Wattage: D3 3 x 1W LEDs or D5 5 x
1W LEDs
Recessed housing contains four (4) 1/2
" NPS conduit inlets (two (2) on bottom
and one on each side) and internal pull-through
wiring compartment. Die-cast aluminum back
box contains less than 0.3% copper to prevent
corrosion in concrete or masonry applications.
Fasteners are 300 series stainless steel.
Die-cast aluminum trim ring contains less
than 0.3% copper to resist corrosion. Cast
bronze fixture has polycarbonate, color
impregnated, dark bronze finish. Die-cast
copper-free aluminum with 45° cutoff,
with frosted tempered glass. Cast bronze
louver is natural cast bronze with frosted
tempered glass. Gasketing is silicone.
Finish: Zinc-rich primer and thermoset
powdercoat for durability.
Optical Assembly: Specular aluminum formed
reflector.
Lamping: 13W CFL (GX23D-2). Lower wattage
lamps are acceptable. 40W maximum T10 lamps.
Type 1 Luxeon® high-output LEDs powered
at 350mA to operate for 50,000 hours.
Electrical Assembly: Electronic 120 volt
AC to 12 volt regulated DC, power supply.
Single contact bayonet (S-8). 13W Fluorescent
Socket is a GX23/GX23-2. 4kv rated medium
base porcelain socket. Nickel-plated screw
shell with center contact. Fixture is 12
vo Light Internal electronic transformer
has 120 volt input. Pre-wired with high
temperature 18 AWG wire.
Ballast: Core and coil, NPF, 0° starting
temperature.
Warranty: Three-year limited warranty.
Certification: UL Listed to U.S. safety
standards for wet locations. cUL Listed
to Canadian safety standards for wet locations.
Manufactured to ISO 9001:2000 Standards.
ADA Compliant when used in indoor and outdoor
wall applications.
IP Rating: IP66: Dust-tight and sealed against
direct jets of water.
LED Underwater Light (ULW5D4)
Specialty Low Voltage Landscape Light
Hadco
LED Underwater Light (ULW5D4) LED Pond Light
Specialty Low Voltage Landscape Light
To Order:
Material:
Powder Coated Cast Aluminum
Download Hadco LED Products White
Paper
